Cooperative Automated Transportation (CAT)

Roadway Safety in a Cooperative Automated World

Highway automation is not years away, or even days away. It’s here now, causing a number of state transportation agencies to react with initiatives related to preparing and supporting Connected Automated Vehicles (CAVs) on U.S. roadways.


Connected and Automated Vehicles (CAVs)

Cooperative Automated Transportation (CAT) deals with CAVs, which are vehicles capable of driving on their own with limited or no human involvement in navigation and control. Per the definition adopted by the National Highway Traffic Safety Administration (NHTSA), there are six levels of automation (Levels 0-2: driver assistance and Levels 3-5: HAV), each of which requires its own specification and marketplace considerations.


Vehicle-to-Everything (V2X) and Connected and Automated Vehicles (CAVs)

For traffic safety, vehicle-to-everything communications is the wireless exchange of critical safety and operational data between vehicles and anything else. The "X" could be roadway infrastructure, other vehicles, roadway workers or other safety and communication devices. ATSSA members are at the forefront of these technologies, and are working with stakeholders across new industries to see these innovations come to life.


Sensor Technology

CAVs rely on three main groups of sensors: camera, radar, and Light Detection and Ranging (LIDAR). The camera sensors capture moving objects and the outlines of roadway devices to get speed and distance data. Short- and long-range radar sensors work to detect traffic from the front and the back of CAVs. LIDAR systems produce three-dimensional images of both moving and stationary objects. 


For more information about ATSSA’s efforts on CAT and CAV’s and their interaction with our member products check out the resources below.




Resources

Pam

AASHTO provides update on MASH-compliant devices

The American Association of State Highway and Transportation Officials (AASHTO) recently issued information about new Manual for Assessing Safety Hardware (MASH)-compliant devices that have been granted federal aid eligibility letters.

The AASHTO communication from Director of Engineering Jim McDonnell was issued to provide an update on roadway safety devices now on the market and approved under federal guidelines.  

The devices and letters that detail crash tests on the devices can be reviewed on the Federal Highway Administration’s website. McDonnell also noted that devices that have undergone MASH crash-testing guidelines can also be found on the implementation page of the Roadside Safety Pooled Fund under “Hardware Tested.”

Print
455 Rate this article:
No rating

Please login or register to post comments.

x