Cooperative Automated Transportation (CAT)

Cooperative Automated Transportation

Roadway safety in a cooperative automated world

Highway automation is not years away, or even days away. It’s here now, causing a number of state transportation agencies to react with initiatives related to preparing and supporting Connected Automated Vehicles (CAVs) on U.S. roadways.


Connected and Automated Vehicles (CAVs)

Cooperative Automated Transportation (CAT) deals with CAVs, which are vehicles capable of driving on their own with limited or no human involvement in navigation and control. Per the definition adopted by the National Highway Traffic Safety Administration (NHTSA), there are six levels of automation (Levels 0-2: driver assistance and Levels 3-5: HAV), each of which requires its own specification and marketplace considerations.


Vehicle-to-Everything (V2X) and Connected and Automated Vehicles (CAVs)

For traffic safety, vehicle-to-everything communications is the wireless exchange of critical safety and operational data between vehicles and anything else. The "X" could be roadway infrastructure, other vehicles, roadway workers or other safety and communication devices. ATSSA members are at the forefront of these technologies, and are working with stakeholders across new industries to see these innovations come to life.


Sensor Technology

CAVs rely on three main groups of sensors: camera, radar, and Light Detection and Ranging (LIDAR). The camera sensors capture moving objects and the outlines of roadway devices to get speed and distance data. Short- and long-range radar sensors work to detect traffic from the front and the back of CAVs. LIDAR systems produce three-dimensional images of both moving and stationary objects.


For more information about ATSSA’s efforts on CAT and CAV’s and their interaction with our member products check out the resources below.




Resources

Wanted: Students with creative minds to tackle a traffic safety challenge

Traffic Control Device Student Challenge returns after pandemic pause

Pam 0 4857 Article rating: 5.0

ATSSA and the Transportation Research Board (TRB) Standing Committee on Traffic Control Devices invite students to compete in the 2022 Traffic Control Device (TCD) Student Challenge.

The contest returns after a one-year hiatus due to the COVID-19 pandemic. Students are challenged to come up with “Innovative Traffic Control Device Strategies for Speed Management on Limited Access Freeways.”

The TCD Student Challenge promotes innovation and stimulates ideas in the traffic control devices industry with a goal to improve operations and safety and encourage future generations of roadway safety professionals. As part of the challenge, individuals or student teams submit solutions in the subject area of transportation and roadway safety based on the topic for the year.

ATSSA Announces Innovation Awards at 51st Annual Convention & Traffic Expo

Pedestrian safety and work zone products recognized at ATSSA’s Circle of Innovation

Pam 0 6903 Article rating: No rating

FREDERICKSBURG, Va. (Feb. 18, 2021) – Two exhibitors at ATSSA’s 51st Annual Convention & Traffic Expo received Innovation Awards today in recognition of new products  that contribute to the industry’s mission of advancing roadway safety and working Toward Zero Deaths.

The new products from 2020 were evaluated by a panel of judges made up of Department of Transportation personnel. Judges reviewed nine items from companies across the country as part of the New Products Rollout.

ATSSA’s 51st Annual Convention & Traffic Expo was held online and ran over two weeks, from Feb. 8 through today.

MUTCD discussions scheduled for ATSSA’s Convention & Traffic Expo

Take part in chats on nine topics Feb. 16-18

Pam 0 8394 Article rating: No rating

Join the discussion on various aspects of the Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD) during week two of ATSSA’s 51st Annual Convention & Traffic Expo.

The discussions are hosted by ATSSA and take place within the Conversation Lounge of the Convention’s online platform. Check out the topics you want to be part of and join the conversation. Participation is free for everyone registered for the Convention.

Sessions run Tuesday through Thursday next week and cover nine topics.

FHWA extends comment time for MUTCD NPA

New deadline is May 14

Pam 0 9701 Article rating: No rating

The Federal Highway Administration (FHWA) has extended the time for public comment to May 14 for the first comprehensive update to the Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD) in more than a decade.

The document opened for public comment on Dec. 14 as originally reported here and was originally to allow comments through March 15.

The Notice of Proposed Amendments for the 11th edition of the MUTCD contains more than 600 proposed changes, according to a statement from the FHWA.

2021 Convention & Traffic Expo is approaching fast

Don’t forget to register for this online event – Feb 8-12 and 16-18

Pam 0 5494 Article rating: No rating

ATSSA’s 2021 Convention & Traffic Expo is nearly here and final touches are being put in place. For people who have never had the opportunity to attend, this year’s event is fully online so it’s the perfect opportunity to find out what you’ve been missing and take in activities that are new this year.

Registration is open for the event that runs Feb. 8-12 and 16-18. Check out the full schedule that includes two general sessions packed with panels addressing key industry information. Plus, nearly 50 education sessions await on topics from addressing personnel challenges to the latest on technology issues including connected and automated vehicles (CAVs) and pavement markings.

Attendees can also take part in as many as six discussions with their colleagues about the Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD) in the Conversation Lounge within the online platform.

RSS
123578910Last