Pavement Marking

Pavement Marking

Pavement Marking

In a report developed by the U.S. Government Accountability Office (GAO), it was recommended that the U.S. Department of Transportation (USDOT) establish plans to “better manage” initiatives and efforts related to Connected Automated Vehicles (CAVs). GAO officials state within the report, which was released in November 2017, that their reasoning behind the research efforts are based on the potential promise of CAVs to provide transformative safety and mobility benefits, but these benefits also will come with a set of safety and infrastructure challenges for policymakers.


While it also was noted that other components such as urban versus rural settings and local ownership of roadways will play a hand in infrastructure adaptations, many experts in automation and infrastructure back up the report’s claims, and assert that consistent and proper maintenance of the current roadway system is of the upmost importance for conventional and AV motorists — especially when it comes to pavement markings.


ATSSA has a dedicated group of members on its Pavement Marking Committee (member login required), who are working to assert the proper maintenance of pavement marking and advance technologies being developed to help increase safety benefits and accommodation of CAVs. The committee has developed a list of policies and continues to work toward advancing the collaboration between the roadway safety industry and automakers as America progresses toward an automated future.

Resources

ATSSA surveys reveal impact of raw materials supply issues on members

Association advocates on behalf of members amid supply challenges

Pam 0 5090 Article rating: 5.0

Nearly 90% of ATSSA manufacturers and suppliers reported experiencing a shortage of raw materials needed to produce roadway safety products, according to an ATSSA survey this summer.

That percentage increased from 75% when those same members were surveyed in March, according to data assembled by ATSSA.

ATSSA surveyed its members after hearing that limited supplies of materials were impacting the work of the roadway safety infrastructure industry. Multiple factors were leading to the supply challenges: extreme weather in February in the Midwest and Texas, the effects of COVID-19 in the U.S. and delays in the supply line due to international shipping.

Midyear Meeting general session explores connected technology with Audi and Ford executives

Pam 0 6129 Article rating: No rating

Executives with Ford and Audi emphasized the importance of collaboration among key stakeholders as connected and autonomous vehicle technology advances.

Tony Reinhart, director of Government Relations for Ford Motor Company, and Brad Stertz, director of Audi Government Affairs and co-founder and chairman of Partners for Automated Vehicle Education (PAVE), spoke at this morning’s general session at ATSSA’s Midyear Meeting, which runs through Friday.

After opening remarks, Reinhart and Stertz were joined by ATSSA Board Chair Greg Driskell and ATSSA Vice President of Engagement Nate Smith for a panel that took questions from the group assembled in Kansas City, Mo., for the Midyear Meeting.

ATSSA’s 2021 Midyear Meeting gets underway in Missouri

Pam 0 5403 Article rating: 5.0

ATSSA’s 2021 Midyear Meeting kicks off this afternoon in Kansas City, Mo.

More than 300 people have registered for the event that runs through Friday and is being held in hybrid fashion with some attending in person at the Loews Kansas City Hotel and others taking part online.

The week includes the first meeting of the Roadway Worker Protection Council, which takes place Wednesday and evolved from a Roadway Worker Protection Summit held during this year’s Convention and Traffic Expo.

VTTI seeks participants for survey on how connected and automated vehicles will interact with work zones

Pam 0 5865 Article rating: 3.5

Luke Neurauter, senior research associate in the Division of Vehicle, Driver and Safety Systems at the Virginia Tech Transportation Institute (VTTI), is asking ATSSA members and others in the roadway safety industry to take part in a survey on the impact of connected and automated vehicles (CAVs) on work zones.

The purpose is to “better understand how CAV technologies will behave when they encounter typical work zone scenarios and what can be done (from the perspectives of both the CAVs and work zone operations) to ensure ultimate compatibility between all available technologies,” according to information from VTTI Senior Research Associate Tammy Trimble.

The research is sponsored by the Transportation Research Board (TRB).

Registration now open for Midyear Meeting in Kansas City, Mo.

Bringing together members and experts to advance roadway safety infrastructure

Pam 0 4866 Article rating: No rating

Registration is now open for the 2021 Midyear Meeting in Kansas City, Mo., Aug. 17-20.

This in-person event takes place at the Loews Kansas City Hotel, located within walking distance of key downtown attractions.

Meet with ATSSA members and industry experts and help shape the Association’s policies and initiatives for the coming year by participating in Midyear committee and council meetings. This event provides opportunities to network and share with more than 300 like-minded ATSSA members from around the country committed to innovation and advancement of roadway safety infrastructure.

RSS
123578910Last

Altai.Integration.AzureB2CDNNModule

Text/HTML