Pavement Marking

Pavement Marking

Pavement Marking

In a report developed by the U.S. Government Accountability Office (GAO), it was recommended that the U.S. Department of Transportation (USDOT) establish plans to “better manage” initiatives and efforts related to Connected Automated Vehicles (CAVs). GAO officials state within the report, which was released in November 2017, that their reasoning behind the research efforts are based on the potential promise of CAVs to provide transformative safety and mobility benefits, but these benefits also will come with a set of safety and infrastructure challenges for policymakers.


While it also was noted that other components such as urban versus rural settings and local ownership of roadways will play a hand in infrastructure adaptations, many experts in automation and infrastructure back up the report’s claims, and assert that consistent and proper maintenance of the current roadway system is of the upmost importance for conventional and AV motorists — especially when it comes to pavement markings.


ATSSA has a dedicated group of members on its Pavement Marking Committee (member login required), who are working to assert the proper maintenance of pavement marking and advance technologies being developed to help increase safety benefits and accommodation of CAVs. The committee has developed a list of policies and continues to work toward advancing the collaboration between the roadway safety industry and automakers as America progresses toward an automated future.

Resources

AASHTO hosting webinars on results of study on converting MASH to performance-based spec

Pam 0 4578 Article rating: 3.0

The American Association of State Highway and Transportation Officials (AASHTO) is hosting two June webinars to review the results of a study commissioned to explore the possibility of converting the Manual on Assessing Safety Hardware (MASH) 2016 to a performance-based specification.

AASHTO hired the Texas A&M Transportation Institute to do a scoping study to assess the effort, timeline and needs required if the change was undertaken. Results of the study will be presented at two webinars, which will include time for questions. Registration is now open.

MASH scoping study discussed during AASHTO Virtual Spring Meeting 2021

Pam 0 5032 Article rating: No rating

During AASHTO's 2021 Virtual Spring Meeting on Monday, the Council on Highways and Streets (CHS) gathered to provide updates from various stakeholders. The discussion included an update on the Manual for Assessing Safety Hardware (MASH) scoping study to determine the feasibility and potential next steps to convert MASH into a set of performance specifications.

Joyce Taylor from the Maine Department of Transportation (MaineDOT), who serves as design vice chair with AASHTO, gave an update on the MASH scoping study conducted by Texas A&M Transportation Institute (TTI). She discussed the challenges related to current testing procedures and the gray areas within the existing manual that lead to a lack of consistency, as testing may be conducted differently by facilities.

The scoping study, conducted by TTI and sponsored by AASHTO, was completed in April.

ATSSA submits 120 comments for feedback to proposed MUTCD

Pam 0 4634 Article rating: 5.0

ATSSA today submitted 120 comments to the Federal Register on the Proposed Rule for the National Standards for the Traffic Control Devices: Manual on Uniform Traffic Control Devices (MUTCD) for Streets and Highways revision. 

The 23 pages of comments were compiled over the past few months and are the product of input received from ATSSA’s technical committees, MUTCD Chat Lounges during February’s Annual Convention & Traffic Expo, National Committee on Uniform Traffic Control Device (NCUTCD) committee meetings and other conferences attended by ATSSA. The input was produced after sorting through nearly 2,000 comments to the 700-page MUTCD. 

“A huge thank you goes out to our members for leading the charge as this was a herculean effort,” ATSSA Director of Innovation & Technical Services Eric Perry said.

CAT Coalition working group shares research on AV issues, primer plans

Participants share impacts of AVs on highway infrastructure and report on U.S. readiness

Pam 0 6524 Article rating: No rating

Members of the Cooperative Automated Transportation Coalition Infrastructure-Industry (CAT I-I) Working Group shared recently that they are assembling a primer with acronyms and definitions for autonomous vehicle (AV) and connected vehicle (CV) infrastructure and technology.

The primer is not the first of its kind but intended to “bridge the gap” between Infrastructure Owner-Operators (IOOs) and Original Equipment Manufacturer (OEM) practitioners, according to the CAT I-I working group members.

The working group's recent meeting also included presentations by Ted Hamer, managing director at KPMG Corporate Finance, and Paul Carlson, chief technology officer at Road Infrastructure Inc.

ATSSA’s online Convention & Traffic Expo draws worldwide attendance

People who missed the eight-day event can register to watch recordings of all sessions

Pam 0 5429 Article rating: No rating

ATSSA’s 51st Annual Convention & Traffic Expo just wrapped up eight days filled with industry information and plentiful opportunities to interact with experts and innovators in the roadway safety industry.

The fully online event drew attendance from every state in the U.S. and Washington, D.C., plus an international contingent representing Canada, Chile, Denmark, Finland, Spain and the United Kingdom. In addition, department of transportation (DOT) officials taking part represented 43 states, Washington, D.C., Canada and Spain.

People who registered for the event have until April 9 to watch all of the sessions again or see anything they missed. Anyone who was unable to attend over the past two weeks can register now to see all of the sessions, visit exhibits and earn continuing education credits. 

RSS
123468910Last

Altai.Integration.AzureB2CDNNModule

Text/HTML