Signs

Signs

Road Sign

Signs are important fixtures that help advance roadway safety every day throughout the United States. Today, a variety of symbols, shapes and colors are used to convey messages to users on and around the roadways. Signs types include traffic, roadway, warning, railroad, guide, recreational, temporary, regulatory, pedestrian and bicycle.


There are many benefits to using symbols, which include immediate communication with all roadway users and their ability to break language barriers. Colors can communicate approaching scenarios such as using orange to indicate an upcoming work zone or red for an upcoming stop or yielding point. A number of shapes are also used to indicate oncoming situations or to provide roadway users with information such as octagons for stop and long horizontal, rectangular signs displaying guidance information.


Today, traffic signs are being looped into the world of autonomous driving technology. Research efforts are being made to equip traffic signs with technology, like embedded machine-readable codes, to allow them to communicate with Connected Automated Vehicles (CAVs) and other mapping devices.


ATSSA has dedicated group of members on its Sign Committee (member login required), who work to:

  • Enhance members’ businesses by increasing their understanding of traffic control devices on private property,
  • Influence the present and future direction of Minimum Retroreflectivity Standards,
  • Inform and educate roadway safety industry members on sign industry-related matters,
  • Provide knowledge and education about signing retroreflectivity,
  • Work to have dedicated funds identified and available for sign management systems and the implementation of upgraded programs to conform with MRS,
  • Monitor and influence the development of a new MUTCD chapter on changeable message signs, and
  • Improve upon and solicit greater committee member participation in Sign Committee meetings and on task forces, including recruitment of new committee members.

Resources

ATSSA & NCUTCD urge publication of MUTCD without delay

Committee votes today for publication without incorporating PROWAG

Pam 0 4537 Article rating: 4.0

The National Committee on Uniform Traffic Control Devices (NCUTCD) passed a resolution today recommending the final rule on the Manual on Uniform Traffic Control Devices (MUTCD) not be delayed to address this week’s issuance of a final rule for pedestrian accessibility issues.

The U.S. Access Board on Tuesday issued its final rule providing minimum guidelines for accessibility of pedestrian facilities in the public right-of-way, known as PROWAG.

On May 2, ATSSA President & CEO Stacy Tetschner sent a letter to Federal Highway Administration Administrator Shailen P. Bhatt urging the FHWA to publish the updated Manual on Uniform Traffic Control Devices (MUTCD) by the deadline set forth in the U.S. Code, which was May 15.

ATSSA voted in favor of today’s resolution passed by the NCUTCD.

NCUTCD summer meeting provides traffic signals, VRU, MUTCD updates

Pam 0 7102 Article rating: No rating

The National Committee on Uniform Traffic Control Devices (NCUTCD) summer meeting addressed a variety of topics including traffic signals and vulnerable road users and provided an indication that work is progressing on the updated Manual on Uniform Traffic Control Devices (MUTCD).

In May, ATSSA President & CEO Stacy Tetschner sent a letter to Federal Highway Administration Administrator Shailen P. Bhatt urging the FHWA to publish the updated MUTCD by the May 15 deadline set forth in the U.S. Code. Tetschner acknowledged the "tremendous amount of work” needed to update the MUTCD but said he wanted to “stress how vital it is that this statutory deadline is met.”

Toward the end of the summer meeting of the NCUTCD, also referred to as “the National Committee,” federal officials made reference to August, suggesting work on the final rule is moving forward. However, there was no commitment that it would be published that month.

 

Apply for ATSSA’s New Products Rollout by Nov. 1

Pam 0 3049 Article rating: 4.7

Apply by Nov. 1 to participate in ATSSA’s New Products Rollout (NPRO) to discover the future of roadway safety innovations. NPRO will be held during ATSSA’s 54th Annual Convention & Traffic Expo in San Diego, Feb. 2-6.

Exhibitors who introduced products after Jan. 1, 2021, are eligible to apply. This year’s earlier deadline is due to the Convention’s earlier date.

Entries accepted for NPRO will be included in the New Products Listing, which showcases the products to more than 3,700 roadway safety professionals who attend ATSSA’s Annual Convention & Traffic Expo, including listing on the Convention website and mobile app.

ATSSA research indicates raw materials shortage receding

Maria Robertson 0 4532 Article rating: 4.5

Since the first quarter of 2021, ATSSA has monitored the availability of several key raw materials on behalf of the roadway safety infrastructure industry.  In the most recent survey conducted in May, most members surveyed indicated they are seeing lessening impacts from the raw materials shortages of last year.

In response to the latest raw materials survey results, ATSSA President & CEO Stacy Tetschner said, “I understand there may be continued challenges in obtaining electronic components and microchips to support the demand for signs and signals. Resin, plastics and sheeting have also been referenced. However, most of the suppliers feel they will be able to meet their contractual obligations for this year and be able to build on these successes into 2024. While this is better news than a year ago, we will continue monitoring the availability of materials by surveying our manufacturer and supplier community to ensure ATSSA keeps our industry informed.”

Worker protection headlines Spring Issue of Roadway Safety magazine

Convention Extra supplement details awards, highlights of 2023 Traffic Expo

Pam 0 8925 Article rating: 2.0

Roadway Worker Protection Council Chair Doug Dolinar told Roadway Safety magazine it’s time for a “paradigm shift” in how the industry looks at worker safety.

The Council spent the past year laser focused on that issue, producing a Worker Protection Toolkit that provides members aids for that effort. Details on the toolkit are included in the latest issue of Roadway Safety magazine.

Plus, check out the Convention Extra supplement, packed with highlights from this year’s record-breaking Convention & Traffic Expo in Phoenix where roadway safety and innovation intersected.

RSS
1345678910Last

Altai.Integration.AzureB2CDNNModule

EasyDNNnewsWidgets